Hotline:0755-88821664
 Products
 
 
Industrial Switch Your location: Home > Products > Industrial Switch
4*SFP to 8*10/100Base-Tx Managed Industrial Fiber Switch

4*SFP to 8*10/100Base-Tx Managed Industrial Fiber Switch




  • 4 1000Base-X SFP ports,2 100Base-FX ports,8 10/100Base-T(X) ports
  • “O-Ring” (recovery time<20ms), RSTP/STP, and MSTP for network redundancy
  • SNMPv3, ieee802.1X, HTTPS and SSH to enhance network security
  • Port-based VLAN, IEEE802.1Q VLAN and GVRP to ease network planning
  • DHCP Option 82 for IP address assignment with different policies
  • Ethernet/IP and Modbus/TCP industrial Ethernet protocol supported
  • Bandwidth management prevents unpredictable network status
  • RMON for efficient network monitoring and proactive capability
  • Lock port allows access by only authorized MAC addresses



  • Introduction
  • Ordering
  • Download

  • Description

    ZYT-GY2416-SFP This managed industrial Ethernet switch is designed to match the critical industrial standards. With reliable and simple operation against vibration and shock, and wide operation temperature range, it could match a variety of harsh environments.
    The switch complies with CE and FCC standards, and passed the 100% burning test to ensure that it will fulfill the needs of industrial applications. It is a good choice for an economical solution for industrial Ethernet connections.

    Physical Characteristics

    Housing: Aluminum Alloy material with IP40 Protection

    Dimension: 138mm(L) X 112mm(W) X 60mm(H)

    Weight: 710g

    Installation: Din-Rail mounting, Wall mounting

    Switch Properties

    Priority Queues: 4

    Maximum No of Available VLANs: 256

    VLAN ID: 1-4094

    IGMP Groups: 256

    MAC Table Size: 8K

    Packet Buffer Size: 1M bit

    Interfaces

    SFP Port: 1000Base-X interface

    Fiber Port: 100Bse-FX (SC/ST/FC connector optional)

    RJ45 Port: 10/100Base-T(X) auto negotiation

    Console Port: rs-232(RJ45 connector)

    Alarm Contact: 1 replay outputs, supports IP/MAC conflict

    Power

    Input Voltage: 24V DC(18-36VDC) Redundant dual inputs

    Input Current: <0.5A @24VDC

    Overload Current Protection: Present

    Reverse Polarity Protection: Present

    Redundant Protection: Present

    Connection: 1 removable 6-pin terminal blocks

    Environmental Limits

    Operating Temperature: -40-85

    Storage Temperature: -40-85

    Ambient Relative Humidity: 5%-95% (non-condensing)

    Technology

    Protocol: OP-Ring, IGMPv1/v2, GVRP, SNMPv1/ v2C/ v3, DHCP Client, TFTP, SMTP, RMON, HTTP, HTTPS, Telnet, Syslog, SSH, SNMP Inform, LLDP, SNTP Service/ Client, PVLAN

    MIB: MIB-II, Ethernet-Like MIB, P-BRIDGE MIB, Q-BRIDGE MIB, Bridge MIB, RSTP MIB, RMON MIB

    Group 1,2,3,9

    Flow Control: IEEE 802.3x flow control, back pressure flow control

    Standards

    IEEE 802.3 for 10BaseT

    IEEE 802.3u for 100BaseT(X)

    IEEE 802.3x for Flow Control

    IEEE 802.1D-2004 for Spanning Tree Protocol

    IEEE 802.1w for Rapid Spanning Tree Protocol

    IEEE 802.1Q for VLAN Tagging

    IEEE 802.1p for Class of Service

    IEEE 802.1X for Authentication

    IEEE 802.3ad for Port Trunk with LACP

    EMS:

    EN61000-4-2(ESD)Level 3

    EN61000-4-3(RS)Level 3

    EN61000-4-4(EFT)Level 3

    EN61000-4-5(Surge)Level 3

    EN61000-4-6(CS)Level 3

    EN61000-4-16(Common-mode Conduction)Level 3

    Shock: IEC 60068-2-27

    Free Fall: IEC 60068-2-32

    Vibration: IEC 60068-2-6

    EMI: FCC CFR47 Part 15, EN55022/CISPR22, Class A

    Industry: IEC61000-6-2

    Rail: EN50155, EN50121-4

    Traffic: NEMA TS-2

    Warranty

    5 years


  • Model No.

    Description

    ZYT-GY2408-2FX-SFP

    4*SFP2*100Base-Fx  to 8*10/100Base-Tx Industrial Fiber Switch

    ZYT-GYM2408-2FX-SFP

    4*SFP2*100Base-Fx  to 8*10/100Base-Tx managed Industrial Fiber Switch

    ZYT-GYM2408-2FX-SFP -POE

    4*SFP2*100Base-Fx  to 8*10/100Base-Tx managed Industrial Fiber Switch with POE

    Optional SFP

    SFP-GE--MM-1005I

    SFP 1.25Gbps, 850nm,  0.5km,  LC

    SFP-GE-SM-1020I

    SFP 1.25Gbps ,1310nm , 20KmLC

    SFP-GE-SM-1040I

    SFP 1.25Gbps ,1310nm , 40KmLC

    SFP-GE-SM-1060I

    SFP 1.25Gbps ,1310nm , 60KmLC

    SFP-GE-SM-1080I

    SFP 1.25Gbps ,1310nm , 80KmLC

    SFP-GE-SM-1100I

    SFP 1.25Gbps ,1310nm , 100KmLC

    SFP-GE-SM-1120I

    SFP 1.25Gbps ,1310nm , 120KmLC

    SFP-WDM-SM-10XXI

    SFP 1.25Gbps ,Single Fiber  10~120KmLC