Hotline:0755-88821664
 Products
 
 
Industrial Switch Your location: Home > Products > Industrial Switch
SFP to 2*10/100/1000Base-Tx Industrial Media Converter

SFP to 2*10/100/1000Base-Tx Industrial Media Converter


  • Green Ethernet solution with ultra low power consumptiondesign
  • Both standard and wide operating temperature
  • Complies with IEEE 802.3, IEEE 802.3u, IEEE802.3z, IEEE802.3ab, IEEE 802.3xauto-negotiation
  • Extends distances ranging from 550m (multi-mode fiber) to 120km (single mode fiber)
  • Supports auto MDI/MDIX function
  • Status LED for easy monitoring of device status
  • Supports up to 10K Byte Jumbo frames
  • Support 8k MAC address
  • IP40 protection class
  • FCC Class A & CE approved


  • Introduction
  • Ordering
  • Download
  • ZYT-GY2102-SFP series is a "green", embedded industrial Ethernet module withlow-power consumption. It is applicable to wind power, subway PIS, power SCADA,sewage treatment, metallurgy, intelligent transportation, rail transit, andmany other industries. ZYT-GY2102-SFP series Embedded Ethernet Switching Module canbe directly installed in the target device.

    Interface

    2 x Ethernet port (RJ45) 10/100/1000Base-Tx

    1 x Optical port (SFP) 1000Base-Fx

    Optical Port

    Available for 1310nm and 1550nm Single mode, and 850nmMulti mode

    Transfer Distance: up to 120km

    Connectors: SFP

    Fiber core: 8.3μm, 8.7μm, 9μm and 10μm onsingle-mode fiber; 50, 62.5 and 100μm on multi-mode fiber

    Ethernet Port

    Standard: IEEE802.3, IEEE802.3u, IEEE 802.3ab, IEEE802.3x

    Available speed: force 10Mbps, force 100Mbps, force1000Mbps and auto-detective 10/100/1000Mbps Full-Duplex and Half-Duplexauto-negotiation

    Connectors: RJ-45 Connector; MDI/MDI-X connectionauto-sensing

    SwitchProperties

    MAC Table: 8K

    Packet Buffer: 1Mbit

    Switching Delay: <5μs<>

    LEDIndicators

    Power, Status, Speed, FX Link/Act, TX Link/Act

    PowerRequirement

    Input: 12VDC~48VDC

    ConsumptionMAX 3W

    Overload Protection: Support

    Reverse Connection Protection: Support

    Redundancy Protection: Support


    PhysicalCharacteristics

    Housing: Metal enclosure

    Protection Class: IP40

    Dimensions: 143 x 104 x 48mm

    Weight: 0.85kg

    Installation: DIN-Rail or Panel mounting

    EnvironmentalLimits

    Operating Temperature: -40°Cto 85°C

    Storage Temperature: -40°Cto 85°C

    Operating Humidity: 10% to 95% RH (non-condensing)

    Storage Humidity: 5% to 95% RH (non-condensing)

    AgencyApprovals

    FCC Part 15 of Class A & CE approved

    IndustrialStandard

    EMI: FCC/CE/LVD/EMC

    EMS:
    IEC61000-4-2(ESD): ±8kV (contact), ±15kV (air)
    IEC61000-4-3(RS): 10V/m (80MHz-2GHz)
    IEC61000-4-4(EFT): Power Port: ±4kV; DataPort: ±2kV
    IEC61000-4-5(Surge): Power Port: ±2kV/DM,±4kV/CM; Data Port: ±2kV
    IEC61000-4-6(CS): 3V (10kHz-150kHz); 10V(150kHz-80MHz)
    IEC61000-4-16(Common mode conduction): 30V(cont.), 300V (1s)

    Shock: IEC 60068-2-27

    Free Fall: IEC 60068-2-32

    Vibration: IEC 60068-2-6

    Warranty

    5 years



  • Model No.

    Description

    ZYT-GY2102-SC20

    1000Base-Fx to 2*10/100/1000Base-Tx, Single mode, 20Km, SC

    ZYT-WDM-GY2102SA/B-SC

    1000Base-Fx to 2*10/100/1000Base-Tx, Single Fiber, 20Km, SC

    ZYT-WDM-GY2102SA/B-FC

    1000Base-Fx to 2*10/100/1000Base-Tx, Single Fiber , 20Km, FC

    ZYT-GY2102-SFP

    1*SFP to 2*10/100/1000Base-Tx

    ZYT-GY2102S-POE

    1000Base-Fx to 2*10/100/1000Base-Tx, Single mode, 20Km, SC POE

    ZYT-WDM-GY2102SA/B-SC-POE

    1000Base-Fx to 2*10/100/1000Base-Tx, Single Fiber, 20Km, SC POE