|
The ZYT-GY1000-SFP series industrial Gigabit media converters are
designed to provide reliable and stable 10/100/1000BaseT(X) to 1000Base-FX
SFP media conversion in harsh industrial environments. ZYT-GY1000-SFP series
supports redundant power inputs, IP40 protection class and meets EMC
industrial level 4 requirements. Its operating temperature ranges from -40 to
85°C. Belonging to ZYTOM Green Ethernet switches series, ZYT-GY1000 series
full load power consumption is as low as 2.5 watts.
ZYT-GY1000-SFP series is a "green", embedded industrial
Ethernet module with low-power consumption. It is applicable to wind power,
subway PIS, power SCADA, sewage treatment, metallurgy, intelligent
transportation, rail transit, and many other industries.ZYT-GY1000 series
Embedded Ethernet Switching Module can be directly installed in the target
device.
|
|
Interface
1
x Ethernet port (RJ45) 10/100/1000Base-Tx 1 x Optical port (SFP) 1000Base-Fx
Optical Port
Available for 1310nm and 1550nm Single mode, and 850nm Multi mode
Transfer Distance: up to 120km
Connectors: SFP
Fiber core: 8.3μm, 8.7μm, 9μm and 10μm on single-mode fiber; 50, 62.5
and 100μm on multi-mode fiber
Ethernet Port
Standard: IEEE802.3, IEEE802.3u, IEEE 802.3ab, IEEE802.3x
Available speed: force 10Mbps, force 100Mbps, force 1000Mbps and
auto-detective 10/100/1000Mbps Full-Duplex and Half-Duplex auto-negotiation
Connectors: RJ-45 Connector; MDI/MDI-X connection auto-sensing
Switch Properties
MAC Table: 8K
Packet Buffer: 1Mbit
Switching Delay: <5μs
LED Indicators
Power, Status, Speed, FX Link/Act, TX Link/Act
Power Requirement
Input: 12VDC~48VDC
Consumption MAX 4.5W
Overload
Protection:： Support
Reverse Connection Protection: Support
Redundancy Protection: Support
|
Physical Characteristics
Housing: Metal enclosure
Protection Class: IP40
Dimensions: 348x 104 x 143mm
Weight: 0.42kg
Installation: DIN-Rail or Panel mounting
Environmental Limits
Operating Temperature: -40°C to 85°C
Storage Temperature: -40°C to 85°C
Operating Humidity: 10% to 95% RH (non-condensing)
Storage Humidity: 5% to 95% RH (non-condensing)
Agency Approvals
FCC Part 15 of Class A & CE approved
Industrial Standard
EMI: FCC/CE/LVD/EMCEMS:
IEC61000-4-2(ESD): ±8kV (contact),
±15kV (air)
IEC61000-4-3(RS): 10V/m (80MHz-2GHz)
IEC61000-4-4(EFT):PowerPort:
±4kV;DataPort: ±2kV
IEC61000-4-5(Surge):PowerPort:
±2kV/DM, ±4kV/CM;
Data Port: ±2kV
IEC61000-4-6(CS): 3V (10kHz-150kHz);
10V (150kHz-80MHz)
IEC61000-4-16(Common mode conduction):
30V (cont.), 300V (1s)
Shock: IEC 60068-2-27
Free Fall: IEC 60068-2-32
Vibration: IEC 60068-2-6
Warranty
5 years
|
